MSL PULP – mslpulppapepr

Bleach Hardwood pulp

Standard / ECF quality

Quality Certificate

Hardwood Kraft Pulp (HP1high quality)

(The mechanical strength of the grinding in the mill CRA to 60 g Fr)

Typical Physical Properties T220 SP-96
	Minimum	Average	Maximum
Freeness	18	25	35
The absolute tear resistance	44	48	52
Burst Index	0.8	2.2	3.8
Breaking Length	8	9.7	10.2
Fracture strength (number of double folds)	300	820	1300

Physical Analysis
Fiber Length Average	0.7-0.9 mm

Physical Analysis
Brightness, ISO	87-88.5
Dirt, sht.sorinok area From 0.1 to 1.00 mm ², inclusive, not more than	13-45
Dirt, sht.sorinok area From 1.0 to 2.00 mm ², inclusive, not more than	2-1
Dirt, sht.sorinok area St. 2.0 mm ²	0-0
pH of the aqueous extract 5.0-7.0	5.0-7.0-5.5
bale weight	201kg
Bale size	450x600x800

Bleach Eucalyptus pulp

Standard / ECF quality

Quality Certificate

Typical Physical Properties T220 SP-96
	Minimum	Average	Maximum
Freeness c.c.C.S.F	300	435	500
Tearing index mNm²/g	44	48	52
Burst Index kpa m²/g	42	45	47
Breaking Length	7	7.5	8
Bulkness c.c./g	1.0	1.44	1.8

Physical Analysis
Brightness, ISO	87
Dirt count TAPPI	6
TAPPI viscosity 0.5% CED CPS	11
Opacity	72 %
pitch	0.273%
Folding endurance	111
pH of the aqueous extract 5.0-7.0	5.0-7.0-5.5
bale weight	201kg
Bale size	450x600x800

TECHNICAL DATA SHEET

Betula

Bleached Hardwood Kraft Pulp

PULP CHARACTERISTICS SPECIFIC REFINING ENERGY [kWh/t]

Typical value		Spec
Brightness, ISO % ISO 2470-1	89	≥ 88
Impurities, mm2/kg ISO 5350	3
Extractives, % SCAN-CM 49:93	0,2	≤ 0,4
Ash content, % ISO 1762	0,4	≤ 0,7
pH ISO 6588	6	5,0-7,0

FIBRE CHARACTERISTICS
		Typical value
Fibre length, mm Metso FS5		1,0
Coarseness, mg/m Metso FS5		0,08

RAW MATERIAL

Hardwood

Birch, Aspen and Sawdust

Specific Refining Energy	CSF		SR number		Tensile index		Stiffness index		Tear index		Scott Bond		Density		Opacity		Air res.
kWh/t	ml				Nm/g		Nm/g		mNm2/g		J/m²		kg/m³		%		s
0		576		16		37		5,6		6,4		193		680		73,7		3,7
36		499		21		60		7,2		7,3		371		744		70,0		10,6
79		362		30		77		8,0		6,8		689		796		66,7		56,0

157 169 55 90 8,8 5,7 1501 866 60,6 1482,7

4	567		16		40		5,8		6,5		213		688		73,3		4,5
36	500		20		60		7,1		7,3		367		744		70,0		10
99	313		37		80		8,2		6,5		895		813		65,2		418
31		508		20		57		7,0		7,2		348		736		70,4		9,8
55		437		25		68		7,6		7,0		514		767		68,5		31

78 366 30 76 8,0 6,8 675 794 66,8 32

36	500	20	60	7,1	7,3	368	744	70,0	10
67	400	28	72	7,8	6,9	601	781	67,6	43
11	552	17	44	6,1	6,7	248	700	72,6	6

Typical values are averages from all mill quality control samples during 2015. They are given in good faith to represent mill performance and do not constitute contractual undertaking. Values in the table are mean (indicative) values from pulp testing with Voith-Sulzer refining, using standard water. Specific Edge Load 0,5 J/m, ISO testing methods (H 50%, 23 °C, 60 gr/m2 sheets).

Softwood bleached pulp

Standard / ECF quality

Quality Certificate

Bleached Softwood Kraft Pulp (HP2high quality)

(The mechanical strength of the grinding in the mill CRA SR 60 oz)

Typical Physical Properties T220 SP-96

Freeness

18

21

25

35

The absolute tear resistance

40

44

48

52

Burst Index

44

65

71

78

Breaking Length

7

7.8

10.6

11.2

Fracture strength (number of double folds)

800

35

52

3.8

10.2

1300

1120

1200

1300

Physical Analysis
Fiber Length Average	2.42 mm
Coarseness, mg/m	0.187
Ash Coarseness	1.00

Physical Analysis
Brightness, ISO	MIN86 – MAX88
Dirt Area, modified TAPPI ppm modifiedTAPPI ppm Area, modifiedTAPPI ppm Area, modifiedTAPPI ppm	<4.00
pH of the aqueous extract 5.0-7.0	5.0-7.0-6.3
bale weight	201kg
Bale size	450x600x800